I have been wanting to create a T Shirt Tote for some time now, but as it happens, life gets in the way. I have a wonderful, thrifted shirt that my son gave me that is destined to become a knitting bag. But it took a request from a Twitter friend and amazing artist to get me moving. Vicki, from Orion Designs had some shirts with beautiful, hand-painted designs that someone created for her. The shirts were ready for repurposing, so she asked me to "do my magic." I love when someone trusts me enough to say that!
We discussed various options and I developed two ideas for two different bags. I'll share today's bag and also a tutorial. I knew that I wanted to base the design on my T Shirt Pillow. You can take a look at that tutorial - the beginning steps are all identical.
So if you have a favorite shirt that you don't fit into anymore and can't part with, try a tote! Maybe your husband just can't give away his favorite sports jersey - turn it into a "manly" tote that he would be proud to carry!
- 2 t-shirt sides, washed
- 1 yard of fusible interfacing (Pellon 906F, 911FF)
- 3/4 yard of fabric for border, washed
- 3/4 yard of duck cloth, washed
Notes on Materials:
- Use a t-shirt front and back or two separate t-shirts.
- The border fabric can be a contrast or coordinating fabric. I have used polka-dots, tie-dye, and anything that does not have a major, directional pattern.
- Prewash the t-shirts and border fabric to preshrink them, especially if they are brand new. You can also prewash the duck cloth. If you really want to be careful about shrinkage, I'd recommend washing and drying the duck cloth twice.
- It isn’t necessary to use an interfacing specifically designed for knits. The interfacing is added for stability and ease of sewing.
1. Cut squares: When cutting the t-shirt into a square, I use an Omnigrid that has been custom cut to a 13 ¼” square template. You can make a clear vinyl template cut to this size or simply measure and mark a square.
2. Cut Border Fabric Strips:
Cut 4 strips 3 ½ x 13 ¼
Cut 4 strips 3 ½ x 18 3/4
3. Apply interfacing: Cut the interfacing to fit just inside the back of the T Shirt. Apply the interfacing per the manufacturer’s instructions to the back side of the t-shirt.
Place the t-shirt on your ironing board with the logo side down. Then place the interfacing on, covered by a damp hanky. Fuse using a dry iron. When the hanky stops steaming, the fusing is typically complete.
4. Assemble and Sew Two Sides: Pin the shorter border pieces to the top and bottom of the t-shirt.
Sew or serge using a ¼” seam. Press the stitching line and then press seams toward the border. When pressing, especially from the right side, avoid pressing the t-shirt logo. It can melt!
Now pin the longer border pieces to the sides of the t-shirt. Sew and press.
You now have a completed t-shirt block. Repeat for other t-shirt.
5. Sew the Front to the Back: Pin the two squares together and sew, using a ¼” seam allowance, along the sides and bottom, leaving the top open.
6. Press Seams Open
7. Create Boxed Bottom: With the bottom of the bag facing you, take one corner and pull apart so that a triangle is formed and the side seam and bottom seam line up.
Even out the triangle and use a ruler to find the point where it is 3" across. Draw a line at this point.
Stitch along the line. Stitch again 1/4 from the first line of stitching. Cut off the triangle. This creates a boxed bottom for the bag. Repeat with the other bottom corner.
8. Cut the lining: Fold the duck cloth so that the top fabric is at 19" Cut the fabric, with the fold along the bottom, so that the folded piece is 18.5" wide and 18" high.
9. Sew the sides of the lining leaving a 5-6" opening along one side.
10. Sew boxed bottom in the same way you did for the outside of the bag.
11. Create straps: There are a few options here. You can simply use cotton or nylon webbing cut to the length you would like. You can make a tube out of the duck cloth. Or cut the duck cloth double wide, double fold and stitch. I wanted to use the quilting cotton for my handles, so I did the following:
Cut two lengths of duck cloth, each 2" x 36".
Cut two lengths of cotton fabric, each 3.5" x 36".
Fold the duck cloth in half and press. This will become the inside of the strap.
Place the duck cloth on top of the cotton fabric. Warp the fabric around the duck cloth and tuck the last bit under so that the fold runs along one edge.
Edge stitch along each side of the handle.
12. Pin the straps to the outside of the bag, 4" from each side.
13. Place the tote inside the lining, right sides together and pin around the top.
14. Stitch around the top using a 1/2" seam allowance.
15. Pull the bag through the opening in the lining so that the right sides are out.
16. Edge stitch the opening closed.
17. Turn the lining inside the outside of the tote and press. Top stitch along the upper edge and final press the bag, using a press cloth if necessary.
Enjoy your tote bag!